How To Repair Skateboard Deck

How to fix a broken skateboard

Fifty-fifty if your skating spirit is unbreakable, your skateboard certain isn't. But whether your trucks are giving you lot problem, or your latest olfactory organ grind left a scissure in your deck, here'due south your skateboard maintenance survival guide.

Tips To Fix A Cleaved Skateboard Deck

If you're doing tricks on a plank of wood, chances are, that plank is going to become cracked, chipped, unbalanced, or directly-upwards cleaved in half at one betoken or another. Here'south how you can put the pieces back together and go back to skating.

If your deck is croaky or chipped:

First, remove your former grip record with a hair dryer and a razor. Y'all desire a clean surface to piece of work on.
Watch the Rat Vision video below for a super easy, fast fashion to remove grip tape!

Apply epoxy to close the crack, or fill your chip. (Don't have epoxy? You tin can get it for cheap at nearly hardware stores and art supply stores.)
Let the epoxied board dry for 24 hours.
Smooth the crack or scrap with sandpaper.
Apply new grip tape.

If your deck is unbalanced:

If your lath is suddenly turning without y'all telling it to, it might exist unbalanced. To ready, tighten and loosen your kingpin (and exam the ride after each adjustment!) until your board feels like it's dorsum on the right runway.

Your deck is probably warped if it simply ISN'T BALANCING, and y'all feel like you've tried everything, but it'south still out of whack.

If your deck is warped:

Remove your trucks and wheels from the deck.
Immerse your deck in water overnight. This will make the wood more pliable and easy to bend back into shape.
In the forenoon, take the deck out of the water, and place a flat, heavy object on acme for 24 hours--think books, cement block, etc. You lot might as well need to get some clamps involved, if you have them.

For a more involved (but arguably more than effective) strategy, spotter Earthwing's video beneath:

Tips To Fix Skateboard Bearings

Are your bearings stuck? Did a begetting popular out? Are you nevertheless trying to become your bearings? (Sorry, bad joke.) Anyhow. These simple tips volition gear up most of your begetting woes:

Remove the nuts that concur the wheels onto the board.
Carefully button a screwdriver through the middle of the bearings.
Apply begetting lubricant and pop them back in.
Reattach your wheels.

For even more than guidance on fixing your skateboard bearings, sentry Braille Skateboarding's super-helpful instructional video below!

Tips on Fixing Skateboard Trucks

Trucks not turning? Trucks too loose? Hither are the truck removal steps you're looking for:

Accept off the kingpin nut with your crescent wrench
Pull off the washer.
Pull off the white rubber bushing.
Pull the hanger out of the pin cup.
Add a little chip of bar soap to the pivot cup and reassemble.

For more visuals and fifty-fifty more than tips, watch Spirit Longboarding'southward video on fixing squeaky skateboard trucks:

Determination

Whether your board needs a tiny tune-up or a larger fix, it's definitely within your capabilities. Apply these tips and you lot'll be rolling again in no time!

Skaters--whatever tips? How do you go your board back on rail when it needs some TLC?

Additional resources:

https://world wide web.ifixit.com/Guide/How+to+fix+squeaky+trucks/15981

http://brokeskate.com/category/skateboard-repair/